Benzene, 1-(1,1-dimethylethyl)-4-[2-(trichlorosilyl)ethyl]- - Names and Identifiers
Benzene, 1-(1,1-dimethylethyl)-4-[2-(trichlorosilyl)ethyl]- - Physico-chemical Properties
Molecular Formula | C12H17Cl3Si
|
Molar Mass | 295.71 |
Density | 1,16 g/cm3 |
Boling Point | 124-129°C 2,5mm |
Flash Point | 108°C (226°F) |
Vapor Presure | 0.00115mmHg at 25°C |
Specific Gravity | 1.16 |
Sensitive | 8: reacts rapidly with moisture, water, protic solvents |
Refractive Index | 1.51 |
Benzene, 1-(1,1-dimethylethyl)-4-[2-(trichlorosilyl)ethyl]- - Risk and Safety
Risk Codes | 34 - Causes burns
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
|
UN IDs | 2987 |
TSCA | No |
Benzene, 1-(1,1-dimethylethyl)-4-[2-(trichlorosilyl)ethyl]- - Introduction
[2-(4-tert-butylphenyl)ethyl](trichloro)silane is an organosilicon compound with the chemical formula C14H19Cl3Si. The following is a description of the properties, uses, preparation and safety information of the compound:
Nature:
(tert-butyl) phenylethyltrichlorosilane is a colorless and transparent liquid with a pungent odor at room temperature. It is insoluble in water, but soluble in organic solvents such as ethanol and esters.
Use:
(tert-butyl) phenylethyltrichlorosilane is widely used in organic synthesis. It can be used as a silicone monomer for the preparation of silicone polymers, silicone rubber, silicone oil and other compounds. In addition, it can also be used in the preparation of surfactants, water repellents, lubricants, etc.
Method:
(tert-butyl) phenylethyltrichlorosilane can be prepared by a Silylation reaction. One common method of preparation is to react p-(tert-butyl) benzoic acid with bromoethane to produce P-(tert-butyl) phenylethyl acetate, which is then reacted with triphenylsilyl chloride to produce the final product.
Safety Information:
(tert-butyl) phenyl ethyl trichlorosilane is an irritating compound. Pay attention to protect eyes and skin and avoid direct contact when using it. It may also be toxic to the environment, so discharge into water bodies should be avoided. Keep away from ignition and flammable substances during handling and storage. During use, please strictly abide by relevant safety operation regulations.
Last Update:2024-04-10 22:29:15